1. Hot-pluggable SFP footprint
2. Extended case temperature range: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
3. Fully metallic enclosure for low EMI
4. Compact RJ-45 connector assembly
5. It supports RX_LOS(Loss of Signal) function
6. Compatible with IEEE802.3u
7. Access to physical layer IC via 2-wire serial bus
8. A 10/100BASE-TX/ 100BASE-FX converter

100/1000Base-T, Copper RJ-45 SFP, SFP-GE-T

● 100/1000Base-T
● Data Rate: 100~1000Mb/s multi-rate
● Interface: RJ-45
● Ratch: 100 meters transmission over CAT.5e
● Cable: CAT.5e Cable
● F-tone Networks offer Compatible Service

1000BASE-T Copper SFP Transceiver

F-tone Networks 1000BASE-T copper SFP transceiver is based on the SFP Multi-Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3, which support 1000Mbps data-rate up to 100 meter reach over unshielded twisted-pair category-5 cable.

10G SFP+ Active Copper Cable Assembly

Product Description
F-tone Networks’s Active SFP+ Copper Cables are full-active 11.1Gbps cable assemblies.The cablesare compliant with the current SFF-8431, SFF-8432 and SFP+ MSA specifications. They fill the expanding need for cost effective data center interconnects that cannot be served with passive copper or expensive fiber optic solutions.

10G-BASE-T Copper SFP+ Transceiver

10GBASE-T Copper SFP+ Transceiver

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1-4Gb SFP Interconnect Cable provide interconnection among switches, servers and routers with 1.25GbE SFP connectors to the Fibre Channel PCI Cards. They can also be used to connect the RAIDs with SFP connectors to most 2Gb and 4Gb Fibre Channel Switches.